UniFiAPAC(UAP-AC)
UniFiAP支援802.11a/b/g/n/ac標準協定,
28dbm大功率,能夠提供高達1300Mbps的速度和連結到125米(400英尺),
時尚壁掛式和天花板安裝設計(包括所有附件:固定件,poe電源)
License level L5授權
Cloud Router Switch is our new Smart Switch series. It is a fully functional Layer 3 switch, and is powered by the familiar RouterOS. All the specific Switch configuration options are available in a special Switch menu, but if you want, ports can be removed from the switch
configuration, and used for routing purposes.
Choose ports for Wire speed switching, or for routing purposes.
What’s more – this device has a built in 2.4GHz wireless access point, this means you can have an AP, a router with any number of ports, and a full wire speed smart switch, all in one device – ideal for medium/small businesses and offices. It has 24 Gigabit ports, one SFP cage, a microUSB port and a built in Wireless AP.
Perfect SOHO gateway router, switch, 11n AP all in one box
• Ethernet, Fiber, or 4G (with optional USB modem) gateway connection to Internet
• RouterOS gateway/firewall/VPN router with passive cooling
• up to twenty-five gigabit switch ports (1xSFP and 24xRJ45)
• 1000mW high power 2.4GHz 11n wireless AP
| Details | |
|---|---|
| Product code | CRS125-24G-1S-2HnD-IN |
| SFP DDMI | Yes |
| CPU nominal frequency | 600 MHz |
| CPU core count | 1 |
| Architecture | MIPS-BE |
| Size of RAM | 128 MB |
| 10/100 Ethernet ports | 0 |
| 10/100/1000 Ethernet ports | 24 |
| MiniPCI slots | 0 |
| MiniPCI-e slots | 0 |
| Wireless chip model | None |
| Wireless standards | 802.11b/g/n |
| Number of USB ports | 1 |
| Power Jack | 8-28V DC |
| Voltage Monitor | Yes |
| CPU temperature monitor | No |
| PCB temperature monitor | Yes |
| Dimensions | 285x145x45mm |
| Operating System | RouterOS |
| Operating temperature range | -35C to +65C |
| License level | L5 |
| Antenna gain DBI | 4dbi |
| Current Monitor | No |
| TX power | 30dBm |
| CPU | AR9344-DC3A-R |
| SFP ports | 1 |
| USB slot type | microUSB type AB |
| Suggested price | $209.00 |
|
合計10個網路接口,其中有五個是Gigabit介面,另外5個是100M介面。 支援switched硬體交換。 ETH1 支援PoE受電。 ETH10 支援電源輸出(500mA)。 新的Atheros 600MHz 74K MIPS網路處理器,128MB記憶體和RouterOS L4授權。 無線的規格為802.11b/g/n 300Mbps |
The RB2011 is a low cost multi port device series. Designed for indoor use, and available in many different cases, with a multitude of options.
The RB2011 is powered by RouterOS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring – just a few of the vast number of features supported by RouterOS.
RouterBOARD 2011UAS-2HnD has most features and interfaces from all our Wireless routers. It’s powered by the new Atheros 600MHz 74K MIPS network processor, has 128MB RAM, five Gigabit LAN ports, five Fast Ethernet LAN ports and SFP cage (SFP module not included!). Also, it features powerful 1000mW dual chain 2.4Ghz (2192-2732MHz depending on country regulations) 802.11bgn wireless AP, RJ45 serial port, microUSB port and RouterOS L5 license, as well as desktop case with power supply, two 4dBi Omni antennas and LCD panel- all this for only $129!
Tested and recommended to use with MikroTik SFP modules: S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included)
RouterBOARD 2011UAS-2HnD-IN comes with desktop enclosure, LCD panel and power supply.
Wall mount kit (product code RBWMK) for network closet is available for purchase as an optional accessory.
| Details | |
|---|---|
| Product code | RB2011UiAS-2HnD-IN |
| SFP DDMI | Yes |
| CPU nominal frequency | 600 MHz |
| CPU core count | 1 |
| Size of RAM | 128 MB |
| 10/100 Ethernet ports | 5 |
| 10/100/1000 Ethernet ports | 5 |
| MiniPCI slots | 0 |
| MiniPCI-e slots | 0 |
| Wireless chip model | AR9344-DC3A |
| Wireless standards | 802.11b/g/n |
| Number of USB ports | 1 |
| Power Jack | 8-28V DC |
| 802.3af support | No |
| PoE | 8-28V DC on Ether1 |
| Voltage Monitor | Yes |
| CPU temperature monitor | No |
| PCB temperature monitor | Yes |
| Dimensions | 214mm x 86mm for PCB |
| Operating System | RouterOS |
| Operating temperature range | -35C to +65C |
| License level | L5 |
| Antenna gain DBI | 4dbi |
| Current Monitor | No |
| TX power | 30dBm |
| CPU | AR9344-DC3A |
| Max Power consumption | 11W |
| SFP ports | 1 |
| USB slot type | microUSB type AB |
| Number of chains | 2 |





↓如何備份↓
如果操作出現失敗,可能是密碼問題,可以先還原成出廠值後再做一次還原成出貨時的設定值
另外,因為可能會有人把備份檔還原到其他機器,這樣會造成二台機器網口的mac-address都一樣,
因此有設定還原之後,每次開機後60秒都會自動重置所有的網口mac-address還原成出廠的原始值,以避免mac-address一樣造成衝突.
RB450G RB850G RESET方法
準備工具 金屬筆芯得原子筆一支
先拆機殼
如下圖,步驟如下
1.先拔掉電源.
2.用原子筆芯插進去.
3.插上電源(原子筆芯持續插著)
4.維持1秒即可完成.
5.短路點可能會接觸不良,可以重覆多做幾次.
6.因為RB450G RB850G 外殼為鋁的材質,螺絲鎖回去時請記得輕一點,太用力會容易脫牙.
步驟如下
1.先拔掉電源.
2.把機器底部的塑膠墊拆掉,裡面會有一個洞. 然後用用原子筆芯插進去.
3.插上電源(原子筆芯持續插著)
4.維持1秒即可完成.
5.短路點可能會接觸不良,可以重覆多做幾次.
步驟如下
1.先拔掉電源.
2.機器底部有一個洞(如底下照片), 然後用用原子筆芯插進去.
3.插上電源(原子筆芯持續插著)
4.維持1秒即可完成.
5.短路點可能會接觸不良,可以重覆多做幾次.
其實這個功能ROS 3.x以後就支持了,但是2.9x就很抱歉了。
接下來就看圖吧………

剩下的請移駕論壇瀏覽